“Pouring drizzles” with high-volume spray and high-density mist.
It adopts dual nozzles and a new generation of ultra-large flow Max water pump design, with a maximum flow rate of 11 liters/min. It is equipped with a new brushless motor and high-pressure atomizing nozzle, which comprehensively improves the atomization effect and makes the spraying more uniform and controllable.
Ultra-large flow Max water pump
11 Liters/min super flow
New dual nozzle design
6.5 meters effective spray width
Intelligent high pressure atomization
60-90μm atomization
25L Smart Pesticide Bin
Quick-release medicine box design, one step ahead
Efficient spraying
42 acres spray coverage area in 1 hour
Extraordinary Sowing Efficiency, Extra Evenly Distributed Effect
It adopts the industrial centrifugal sowing disc and screw feeder design, which greatly increases the sowing width. The sowing is more efficient, uniform, and not hurt the seeds. It is equipped with a 25-liter sowing box, which can spread 2.4 tons of fertilizer or 1.6 tons of rice seeds per hour.
The sowing efficiency is calculated based on the flight speed of 8 meters/s and the sowing width of 10 meters. The actual working efficiency depends on the actual situation. The test results are from the standard laboratory of this product and the related-use parameters and data. The use of the product may deviate due to the operating environment, temperature, human operation methods, and other reasons. Please strictly follow the official product instructions and guidelines while using.
50KG/min large flow releasing
Omnidirectional 360° sowing
800~1500rpm/min speed adjustable
Modular design allows quick assembly, quick release and quick change
Omnidirectional protective brim
Equipped with up-view radar, front dynamic radar, and ground-imitation radar modules, it can realize the omnidirectional, four-dimensional perception of obstacles and surrounding environment in flight direction, accurately predict the dynamics of all obstacles, and make flight operations safer.
The field conditions are clear at a glance, and the safety of flight operations is guaranteed
High-performance power motor, combined with 36-inch high-efficiency propeller, greatly increases the stability of the arm, is safe and reliable, and provides stable and sufficient power support for the load.
Increased performance, increased traction
Accurate control, rapid response, energy saving and high efficiency, better heat dissipation performance
More stable flight
The new TATTU 2200mAh 25C 12SIP smart superchargeable battery has more power and fast charging function. It only needs 3 sets of batteries and a smart charger to cycle work.
33 acres surveying and mapping finish in 12 minutes
Building a Smart Agricultural Ecology
Open a new era of unmanned farmland management
Route Planning, Precise Operation
Intermittent spray, No need to worry
Convenient and easy to operate
It can query the black box of the drone and read the abnormal operation status of the drone.
It can query the black box of the drone and read the abnormal operation status of the drone.
Carrier Platform
Dimensions
2250mm*2020mm*750mm(product unfolded size)
1210mm*1210mm*750mm(product folded size)
Total weight of the machine (no load and without battery): 19 kg
Symmetrical motor wheelbase: 1560 mm
Arm tube material: carbon fiber
Protection class IP56
Flight Parameters
Maximum effective take-off weight (near sea level): 53 kg
Standard take-off weight (including battery and full load): 51 kg
Hovering accuracy (good GNSS signal) horizontal ±0.5 m, vertical ±0.3 m
Power battery 14S 22000mAh smart battery
Recommended working environment temperature -10~40 ℃
Maximum operating flight speed: 8 m/s
Maximum flight speed (good GNSS signal): 10 m/s
The maximum take-off altitude is 4000 m (as the altitude increases, the load needs to be reduced)
Hover time
No-load hover time: 24 minutes (take-off weight 26 kg)
Full-load hover time: 10 minutes (take-off weight 51 kg)
Measured near sea level, wind speed < 3 m/s, for reference only
Spraying System
Rated volume: 25 L
Remaining detection: Flow sensor
Number of nozzles: 8
Spray width: 4-8m (depending on operating height, wind speed, and spray volume per acre)
Atomization particle size 60~90μm (related to the actual working environment, spray flow, etc.)
Number of brushless water pumps: 2
Maximum working flow: 10 L/min
Spreading System
Weight: 3 kg
Tank capacity: 25 L
Maximum load inside the sowing box: 25kg
Applicable material seed diameter: 0.5-5mm
Maximum tank gate opening area: 8.6cm²
Radar System
Ground Radar
Modulation method: FMCW
Frequency: 2.4GHz
Protection class: IP65
Height range setting: 1~10m
Ranging accuracy: 0.02m
Obstacle Avoidance Radar (Optional)
Perception range: 2~12m
Conditions of use: The relative altitude of the aircraft is higher than 1.5m and the speed is less than 6m/s
Safe distance: 4m
Obstacle avoidance direction: achieve front and rear obstacle avoidance according to the flight direction
Power System
Motor
Model: JTI9 MAX
Stator size: 96×26mm
KV value: 100KV
Maximum pulling force (single motor): 29 kg
Rated power (single motor): 1500 W
Electronic Speed Control
Maximum continuous operating current: 120 A
Maximum working voltage: 60.9 V (14S Li-polymer battery)
Foldable Propeller
36120 Model: 36120
Control System
Remote Control
Model: H12
Operating frequency: 2.400-2.4833 GHz
Signal effective distance (no interference, no blocking): 1-3km
Battery voltage: 4.2V (rechargeable lithium battery)
Battery capacity: 10000 mAh
Weight: 530g
Dimensions: 190x152x94mm
Supported language: Simplified Chinese/English
FPV Camera
Viewing Angle (FOV): 120°
Resolution: 720P
Flashlight brightness: 1000lux
Flashlight power: 8W
Electricity System
Smart Battery
Model: 14S 22000mAh
Battery Type: 14S Lithium Polymer
Rated capacity: 22 A
Charging ambient temperature: 10~45 ℃
Charger
Model: H26+
Output power: 2400 W
Input voltage: AC, 180~240 V, 50/60 Hz
Output voltage and current: DC direct current, 50~60 V/ 30 A (maximum)
Working environment temperature: -10~40 ℃
1. The specific operation time depends on the actual situation, and it is not ruled out that the new firmware update will bring differences in the time-consuming.
2. Actual job data depends on the actual situation. The test results are from the standard laboratory of this product and the related-use parameters and data. The use of the product may deviate due to the operating environment, temperature, human operation methods, and other reasons. Please strictly follow the official product instructions and guidelines while operating.
3. The effective working range of the sensing distance will vary due to the material, location, and shape of the target object.
The final interpretation right belongs to JTI.